Skip to content
Two-story cedar home with freshly stained siding, balcony, and porch posts
DECK & FENCE STAINING · NAPA VALLEY & BAY AREA

Deck and Fence Staining in Napa, Sonoma, and Vallejo

Fences and decks restored and protected for the seasons ahead.

We clean, prepare, and stain or seal your wood so it looks rich again and stands up to hot summers and wet winters. Owner Lorenzo Utrera brings 15+ years of experience and recommends the right product for your wood.

Mon to Sat, 8 AM to 6 PM · Free written estimates · 15+ years of experience

Request your free estimate

No cost, no obligation. A written estimate for your project.

By submitting, you agree to be contacted about your request. See our Privacy Policy.

Why homeowners choose our deck and fence staining

Sun turns unprotected wood gray and dry, and winter rain soaks it and invites rot. Stain only protects wood that is clean, dry, and properly prepared, so preparation is where we spend the time.

Properties in Sonoma and St. Helena often have long fence lines, large decks, and outdoor living areas. Lorenzo looks at the wood, the sun exposure, and the look you want, then recommends a clear, semi-transparent, or solid stain.

Signs your deck or fence needs staining

Wood tells you when it needs protection. Look for these signs:

  • Gray, weathered boards.

    Sun breaks down the wood fibers on the surface and turns them gray.

  • Water soaks in instead of beading.

    If water darkens the wood right away, the old finish is gone.

  • Splinters and rough spots.

    Dry wood cracks and splinters, especially on deck boards and railings.

  • Mildew or dark stains.

    Shaded areas trap moisture and grow mildew that needs cleaning.

  • Peeling solid stain or paint.

    Failing finishes need to be cleaned and prepared before a new coat.

What is included

  • Deck boards, railings, and stairs
  • Wood fences and gates
  • Pressure washing or wood cleaning
  • Sanding of rough and gray areas
  • Loose nail and screw check
  • Stain or clear sealer
  • Protection for siding and plants
  • Final inspection

Our deck and fence staining standards

Wood cleaned and brightened before staining
Moisture checked before any application
Rough and gray areas sanded
Siding, plants, and hardscape covered

Our step-by-step staining process

1

Wood inspection

Lorenzo checks the wood condition, fasteners, and sun exposure, then recommends a product and sends a written estimate.

2

Cleaning

Decks and fences are cleaned to remove dirt, gray fibers, and mildew.

3

Drying and sanding

The wood dries fully, and rough or gray areas are sanded smooth.

4

Stain or sealer application

We apply the product evenly, working board by board to avoid lap marks.

5

Final inspection

We review the finished deck or fence with you and explain how to care for it.

How to prepare for deck and fence staining

A little preparation keeps the project on schedule:

  • Clear the deck.

    Move furniture, grills, planters, and rugs off the deck.

  • Trim plants near fences.

    Cut back vines and shrubs touching the fence so every board can be reached.

  • Turn off sprinklers.

    Wood must be dry before staining and stay dry while the stain soaks in.

  • Keep pets inside on staining days.

    Fresh stain needs time to dry without paw prints.

  • Pick your stain color on your own wood.

    The same stain looks different on each type of wood, so compare samples on your boards.

Stain or seal: what is right for your wood

Clear sealers show off natural grain but need more frequent care. Semi-transparent stains add color while letting the wood show through. Solid stains hide wear and last longer on older wood. Lorenzo looks at your wood and recommends the option that fits.

White siding with black trim and stained wood stairs

Staining for homes and businesses

Residential

Decks, fences, and pergolas

Backyard decks, privacy fences, gates, railings, and pergolas.

Commercial

Patios and outdoor venues

Outdoor seating decks, fencing, and wood features for restaurants, wineries, and shops.

Deck and fence staining across Napa Valley and the Bay Area

In Sonoma and St. Helena, we stain long fence lines, large decks, and wood features on country properties where the sun is strong. In Napa and Yountville, clients refresh backyard decks, picket fences, and pergolas.

In Vallejo and Fairfield, wind and seasonal rain wear on privacy fences and decks, so regular maintenance makes a big difference. Wherever you are, Lorenzo checks your wood and recommends a clear, semi-transparent, or solid stain.

Staining is a maintenance job as much as a finishing job. After we finish, Lorenzo explains how to care for your deck or fence and roughly when it will need attention again, based on the product and the sun exposure. Many clients pair staining with pressure washing and exterior painting so the whole property is protected in one visit, with one schedule and one written estimate.

What affects the cost of deck and fence staining

We price every deck and fence after seeing it. These factors shape your estimate:

  • Size

    Deck square footage and linear feet of fence.

  • Wood condition

    Gray, weathered, or previously stained wood needs more prep.

  • Product type

    Clear, semi-transparent, and solid stains differ in coverage and cost.

  • Railings, stairs, and detail

    Balusters, stairs, and lattice take extra hand work.

Your written estimate lists every item, so the price we agree on is the price you pay.

Fence & Deck Refinishing questions

More answers on our FAQ page.

It depends on the size of the deck, the wood condition, and the product. Lorenzo sends a written, itemized estimate after seeing it.
FENCE & DECK

Bring your outdoor wood back to life

Get a free estimate for your fence or deck.